{"product_id":"hearcoil-wired-neckloop-for-t-coil-hearing-aids","title":"HearCoil Wired Neckloop for T-Coil Hearing Aids","description":"\u003cp\u003eConnect HearCoil to a receiver with a 3.5 mm audio output and listen through your telecoil-enabled hearing aids.\u003c\/p\u003e\n\u003ch2\u003eWhy choose HearCoil\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListen Through Your Own Hearing Aids\u003c\/strong\u003e – HearCoil sends receiver audio to telecoil-equipped hearing aids, so you can keep using the hearing aids already fitted for you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad 3.5 mm Receiver Compatibility\u003c\/strong\u003e – Works with receivers that provide a standard 3.5 mm audio output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended with AuraClip and AuraView\u003c\/strong\u003e – For a complete Venucast setup, pair HearCoil with the AuraClip (VRC-240) or AuraView (VRC-250) receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Three-Step Setup\u003c\/strong\u003e – Plug HearCoil into the receiver, place the loop around your neck, then switch your hearing aids to their T or MT program.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Volume Where It Is Familiar\u003c\/strong\u003e – Adjust listening level on the connected receiver or your hearing aids; HearCoil itself has no buttons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Personal and Venue Listening\u003c\/strong\u003e – Use it with a compatible receiver for churches, theaters, conferences, tours, classrooms, senior-living activities, and personal listening setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlug the HearCoil 3.5 mm connector into a receiver with a 3.5 mm audio output.\u003c\/li\u003e\n\u003cli\u003ePlace the loop around your neck.\u003c\/li\u003e\n\u003cli\u003eSwitch your hearing aids to the enabled T or MT program.\u003c\/li\u003e\n\u003cli\u003eSelect the desired audio on the receiver and adjust volume on the receiver or hearing aids.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eExpected availability:\u003c\/strong\u003e November 30, 2026.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cp\u003e1 × HearCoil wired T-coil neckloop. Receiver and hearing aids are sold separately.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill HearCoil work with my hearing aids?\u003c\/h3\u003e\n\u003cp\u003eYour hearing aids must have a built-in telecoil and an available, enabled telecoil program, usually marked T or MT. If you are unsure whether your hearing aids include a telecoil, check the manual or ask your hearing care professional.\u003c\/p\u003e\n\u003ch3\u003eWhich receivers can I use?\u003c\/h3\u003e\n\u003cp\u003eHearCoil works with receivers that provide a standard 3.5 mm audio output. For a complete Venucast listening setup, we recommend the AuraClip (VRC-240) or AuraView (VRC-250).\u003c\/p\u003e\n\u003ch3\u003eWhat if my hearing aids support T-coil but I cannot find T or MT mode?\u003c\/h3\u003e\n\u003cp\u003eThe telecoil program may not yet be enabled or included in your hearing-aid program list. Ask your hearing care professional to enable or add the T or MT program.\u003c\/p\u003e\n\u003ch3\u003eHow do I set it up?\u003c\/h3\u003e\n\u003cp\u003ePlug HearCoil into the receiver, wear the loop around your neck, and switch your hearing aids to T or MT mode. Then choose the audio on your receiver.\u003c\/p\u003e\n\u003ch3\u003eWhere do I adjust the volume?\u003c\/h3\u003e\n\u003cp\u003eAdjust volume on the connected receiver or on your hearing aids. HearCoil has no buttons or volume control.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between T and MT mode?\u003c\/h3\u003e\n\u003cp\u003eT mode typically plays the telecoil signal only. MT mode typically mixes the telecoil signal with sound from the hearing-aid microphones. Available programs and behavior depend on your hearing aids.\u003c\/p\u003e\n\u003ch3\u003eWhy am I not hearing any sound?\u003c\/h3\u003e\n\u003cp\u003eCheck that the plug is fully inserted, the receiver is playing the correct audio, and the hearing aids are switched to an enabled T or MT program. Increase volume gradually on the receiver or hearing aids.\u003c\/p\u003e\n\u003ch3\u003eAre the receiver and hearing aids included?\u003c\/h3\u003e\n\u003cp\u003eNo. The package contains the HearCoil wired neckloop only.\u003c\/p\u003e","brand":"Venucast","offers":[{"title":"Default Title","offer_id":54754247475424,"sku":"VHL-038","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/7017\/9296\/files\/vhl-038-hearcoil-main-v2.png?v=1789021378","url":"https:\/\/venucast.ca\/products\/hearcoil-wired-neckloop-for-t-coil-hearing-aids","provider":"Venucast","version":"1.0","type":"link"}